Luxury patterns engineered for Texas heat & heavy loads
Custom-patterned stamped concrete that mimics natural stone, slate, or brick. Built to handle North Texas heat and heavy vehicle loads without cracking.
Your info is secure & never shared
A stamped concrete driveway from Concrete Commandos is more than a place to park — it's a curb-appeal investment that can boost your home's value by thousands. We offer 20+ stamp patterns including ashlar slate, cobblestone, brick, and natural cut stone, each colored and sealed to match your home's exterior.
Every driveway begins with proper excavation and a compacted sub-base engineered for North Texas expansive clay soil. We install a full rebar reinforcement grid, pour a high-strength 4000-PSI mix, and place control joints at calculated intervals to manage natural expansion. The result: a driveway that stays beautiful and crack-free for decades.
Our sealing process uses a high-performance acrylic sealer that protects against oil stains, UV fading, and freeze-thaw cycles. You can choose a matte, satin, or gloss finish, and we re-seal driveways on a recommended 2–3 year cycle to keep them looking new.
Every material is selected for durability, code compliance, and performance in the North Texas climate.
A premium Portland cement blend engineered for Texas temperature extremes and heavy vehicle loads. The 4000-PSI compressive rating exceeds residential code minimums, delivering a dense, durable surface that resists scaling, abrasion, and thermal cracking.
Deformed steel rebar tied in a 24-inch on-center grid. Unlike wire mesh, rebar provides true structural reinforcement — keeping the stamped slab monolithic, distributing vehicle point loads, and holding any hairline cracks tightly closed even as the sub-base shifts with seasonal moisture.
Iron-oxide-based pigments mixed directly into the concrete for through-body color that won't fade, chip, or wear away like surface-applied stains. Available in dozens of earth tones, grays, and warm reds to complement any home exterior.
A dry powder broadcast onto the wet concrete before stamping. It prevents stamp mats from sticking, adds a secondary antiquing color to the surface recesses, and creates the realistic depth and shadowing that makes stamped concrete look like natural stone.
A 4–6 inch compacted layer at 95% Proctor density that isolates the concrete from North Texas expansive clay. This free-draining foundation prevents differential settlement and the cracking it causes.
A high-performance film-forming sealer applied after the 28-day cure. Available in matte, satin, or gloss finishes, it locks in color, protects against oil and UV damage, and enhances the stamped pattern's visual depth. Reapplication every 2–3 years keeps the surface looking new.
A clear, phase-by-phase breakdown so you know exactly what happens and when.
On-site visit to measure, assess soil and drainage, review 20+ stamp patterns and color options, and deliver a free written estimate. Typically scheduled within 48 hours of your call.
Removal of existing concrete (if needed), excavation to grade, installation of crushed-limestone base, and compaction to 95% Proctor density.
Forms set to grade, #3 rebar grid tied and chaired, integral-colored concrete delivered and placed. Screeding and floating prepare the surface for stamping.
Liquid or powder release agent applied, stamp mats pressed into the wet concrete in sequence, then texture and pattern are locked in. Control joints are tooled or saw-cut.
Concrete cures; excess release agent is pressure-washed after 24–48 hours. Foot traffic safe at 24 hours, vehicles at 7 days. Acrylic sealer applied at 28 days for full protection.
Transparent pricing factors so you can plan your budget with confidence. Your free estimate covers every detail.
The primary cost driver. Stamped driveways run $12–$18 per square foot. Larger projects benefit from economies of scale on concrete delivery, stamping labor, and material mobilization.
Simple patterns like seamless texture or slate are at the lower end. Intricate multi-pattern designs, borders, and custom inlays push pricing toward the higher end of the range.
Single integral color is standard. Adding a secondary release color for antiquing, multiple base colors, or custom color matching adds $1–$3 per square foot.
Demolition and haul-off of existing concrete, significant regrading, or tree-root removal adds $1–$3 per square foot. Limited-access sites may require a pump truck ($800–$1,500).
Standard acrylic sealer is included. Upgrading to a high-gloss finish, polyurethane sealer, or a non-slip additive adds $1–$2 per square foot.
Long, narrow, or multi-level driveways require more forming labor and material. Circular or curved driveways add complexity to the stamping process, increasing labor cost.
Every project is unique. Call 214-301-3463 or request a free estimate for a detailed, itemized quote.
We evaluate soil conditions, grade, and drainage, then excavate to the correct depth and compact a stabilized sub-base.
Wood forms set to precise grade with expansion joints planned. A #3 rebar grid is tied at 24-inch on-center spacing.
High-strength concrete is poured, screeded, and floated. Stamp mats are applied with release agent for crisp pattern definition.
After a 28-day cure, we apply a premium acrylic sealer and walk the project with you to confirm 100% satisfaction.
We deliver stamped driveways throughout the DFW northern corridor.
Serving homeowners across Collin County and all of North Texas.
Get a free, no-obligation written estimate. Same-week site visits available.
Durable, affordable flatwork driveways built for Texas clay soil
Extend your living space with custom outdoor concrete
Rock-solid foundations engineered for Texas clay soil
Cool-to-touch stamped decks for barefoot Texas summers
Crisp sidewalks and entryways that boost curb appeal
Restore cracked concrete for a fraction of replacement cost